|
Measure and control pH, ORP, temperature, conductivity, water level, etc.
AT-Control can measure and control pH, ORP (Redox potential), temperature, conductivity, water level and can manage numerous timed circuits such as lighting and dosing. Programming and control can also be managed using a PC via a USB connection. The system is modular in nature so that it can be expanded from a basic module to a complete control unit capable of managing several aquariums. All the modules are interconnected via USB ports so the data can be downloaded to a PC and shown graphically.
Base unit:The Base unit consists of the controller containing the microprocessor, the display and a Power Box. Also included are an interface for PC connection, a software CD with a temperature probe. The Power Box is configured with 6 power outlets, seven USB sockets and direct connections for level and temperature probes. All other probes are connected via the USB ports and a corresponding Interface Box to the Power Box. If more than seven connections are needed, a USB hub can be added. Several Power Boxes can be connected to one Controller via the USB ports. This enables several aquariums with many different probes to be connected to one AT control unit. Set points can be programmed as fixed points or as arithmetic curves so, for example, temperature can be programmed to follow a day/night curve and regulated with heaters and chillers.
Special accessories: Users with a broadband telephone connection can connect the AT control via an Ethernet interface to the internet. AT control can then be controlled or programmed from any remote computer with internet access. Using the optional SMS interface, various alarm notifications can be sent directly to a mobile phone.
|
